The FIRST 1440P + dual 1080P dash cam on the market.
The FIRST DUAL 1080P dash cam on the market: Based on the powerful NT96660 CPU, advanced Sony Exmor IMX323 (rear cam) and OV4689 (front cam) image sensor, the N2 Pro simultaneously captures the road ahead (170°) and cabin (140°) at 1080P@30fps
Dual 1080P Front and Rear Dash Cam with Snapshot
With a 170° front facing OV4689 sensor camera and 140° rear facing sony sensor camera(80° rotatable) in one body, N2 pro shots both front and inside the cabin simutaneously in full hd 1920x1080P 30fps, perfect dash cam for taxis, Uber, rideshare, lyft drivers, commuters, and families, provides drivers and passengers with optimum protection.
Single Front 2.5K 2560x1440P/30fps or 1920x1080P/60fps
If you don't need the inside recordings you can record with the single front facing camera, the advanced F1.8 front OV4689 lens ensures it to capture crystal-clear videos of the road front at: 2560x1440P/30fps, 2304x1296P/30fps, 1920x1080P/60fps, 1920x1080P/30fps.
Sony Sensor Infrared Night Vision
F1.8 6-glass lens front facing cam and unique HDR video system automatically balance the light and dark areas of the video, while Sony IMX323 sensor, F2.0 6-glass lens rear facing cam plus 4 IR LED lights greatly enhances night vision in car at low light environment. If you set it to AUTO ON/OFF, When low-light conditions are detected, the infrared LEDs will automatically turn on to support rear image recording, offering you and passengers a higher level of in-car safety.
Taxi Dash Cam with Voice Recorded
Built in microphone and speaker to capture high quality audio clear without distortion. Don't want to record voice? Just one press to turn the microphone off.
24 Hours Motion Detection Parking Mode Hardwire Dash Camera
Auto switch to Parking mode when you parked your car. Triggered by the motion detection, the dash cam will auto record once the front camera or inside camera detects motion. The camera needs a constant power supply either from an external battery pack or hardwire(Asin: B07G9WTWB9).
Dash Cam Heat Resistant and Cold Resistant
Equipped with PC and ABS housing, the N2 pro dual dash cam can resist heat from -4 to 194 Deg, working temp is -4 to 158 Deg.
Dual Dash Camera with Optional GPS
Optional GPS for you to track the driving route, location and speed in either KM/H or MP/H. To use gps function, please buy an extra N2 PRO gps mount to use it(Asin: B07CYW6JXW).
Auto LCD OFF
Support auto LCD off timer which enables the lcd off automatically after the recording begins so you won't be disturbed by another glowing rectangle on your windshield, you can also turn this function off if you prefer the LCD stays on.
Auto Starts up and records automatically when the ignition sparks up, loop recording saves the latest the videos and overwrites the oldest videos when card reaches capacity. Supports up to 256GB card max, please format on the dash cam before use.
Time lapse function automatically takes photos at specified intervals and edit them together to a video clip so they can play much faster than real time. With this function on, you can record movements, changes, or events that take place over a long period of time, or just captures frames for a time lapse video of a multi-week road trip, greatly saved space on your memory card.
Date and Time stamp
This is especially useful if you need to use your video footage as evidence at times. Ensure that the date and the time are accurate when you install your camera.
What's in the box
1X N2 Pro Dash Cam with Suction Cup Mount;
1X 3ft Mini USB Cable;
1X Car Charger with 10ft Mini USB Cable;
1X User Manual;
1X Quick Guide;
1, We recommend Samsung Pro Endurance Card or Samsung Evo Card. Samsung Micro SD cards would only be made in either Korea or the Philippians. Please be sure to buy a genuine Samsung card.
2, Please format sd card on your camera directly. Please insert the card into the camera, (if it says 'please insert TF card' here, please press the recording button(OK button) and press M button to access into the menu, go 'system setup' and choose 'format'. Then the card will work well on the camera.
3, Please press Power button to toggle the night vision mode ON, AUTO ON/OFF, OFF.
4,The built in 250mAh battery is just to keep setting, please always keep the dash cam plugged in, or it will keep telling you to connect the power.
|Model||OnDash N2 Pro|
|Sensor||Front Cam Sensor: OV4689 Rear Cam Sensor: Sony IMX323|
|Display||1.5 inch TFT LCD monitor (4:3)|
|Lens||Front: 170 degree wide viewing angle and full 6 layer glass lens with wide aperture of F/2.0. Rear: 140 degree wide viewing angle and full 6 layer glass lens with wide aperture of F/2.0.|
H.264 compressed format;|
Dual mode: 1920X1080P+1920X1080P; 1280x720P+1280x720P
Single Front Cam mode: 2560X1440P30
|Audio||Built-in microphone and speaker|
|Memorizer||Internal memory: 4M External: SDHC (8-256GB, micro SD card of Class 10, FAT32)|
|USB Port||USB2.0, mini|
|Battery||250mAh 3.7V Polymer Li-ion battery|
|Working Temp.||-4 – 158 deg. Fahrenheit, -20-70 deg. Celsius|
|Storage Temp.||14 – 176 deg. Fahrenheit, -10 - 80 deg. Celsius|
PC Operation System
|Windows XP/Vista/Windows 7/Windows 8/Windows 10/Mac|
How to upgrade the firmware?
Please follow the Steps below to upgrade your device:
1. Download the firmware file (http://vantrue.net/Support/detail/id/47.html) to your PC;
2. Format you microSD card on the camera, and then connect the camera to the computer through the USB port on the camera. Copy the firmware file (in .bin format) to the microSD card, then unplug the camera from the computer and turn it off;
Note: the firmware file (in .bin format) could not be recognized by computer, it could just be recognized by the dash cam, so don’t try to open it on PC, just copy it to the card.
3. Plug the camera to a power charger (not computer), or press the power button;
4. Then the camera will auto upgrade, and it will take about 30 secs to 1 min, during this time, the camera will not turn on and will not respond to any button or operation;
5. Once the dash cam upgraded successfully, it will turn on and work.
6. Please have a check the version of your device now (go to the System Setup menu and turn to the Version) and see if it is VTN2Pro8F.V21_IQ. If it is, then the camera has been upgraded successfully.
7. Format the microSD card when the update has been completed, or the camera will upgrade itself everytime when it detects the firmware file in the card.
Fixed the bug of rear camera’s voice recording when loop recording is off.
Any question, please contact us at email@example.com.
What is the latest firmware version for N2 Pro?